Age
5 to 11
| Article by
NRICH team
| Published

Weigh to Go

"I was wanting to choose a maths topic that would extend into other areas of the curriculum, can you suggest anything?" This question was posed at a professional development day. It was a great conversation starter. The talk turned to the benefits that could be gained in investigating mathematics in other areas of the curriculum and in which subject areas mathematics investigations could be incorporated.

Benefits were listed. Children get a realistic sense that mathematics is part of their world, not just "school work". The skills and understandings acquired and developed in the maths classroom are brought to bear as they solve problems in all areas of life and of the curriculum. Knowledge of how to apply maths is not only broadened but skills are improved as they are practised in more authentic situations than often encountered in contrived lesson scenarios. Importantly, children become aware that when they engage with mathematical problems and investigations they are participating in activities and thinking that have intrigued and puzzled people across ages, civilisations and cultural traditions.

Image
Weigh to Go

The subjects we tend to regard as having greatest correspondence with maths are the sciences. But social studies, history, geography, art and literature are also perfect partners. We can look at any one strand of mathematics in relation to these subject areas. But, because there is so much content, let us simply consider measurement. Of course the concept of "measurement" itself then needs unpacking; do we mean measuring distance, weight, mass, volume, capacity, rotations, position, movement, time, money ... the list goes on. What do we need measurement for? Recording change, comparing, evaluating, constructing, trading ...  How do we measure? The variety of ways both standard and non-standard is amazing, and the tools created by which to measure documents man's technological advances. Already we can see that measurement permeates just about everything and everywhere.
 
This discussion is limited to one form of measurement and how we might begin to introduce the study through one curriculum area, history. The topic is finding the mass of objects, which is commonly called 'weighing'. The mass of a body is the same on earth as it is on the moon but its weight changes because gravitational pull changes. The English curriculum requires this distinction to be taught in primary school.


Some of the earliest tools invented by man were designed to measure mass. The history of weighing does not begin in mathematics or in science but in trade and construction. Primitive societies needed and created rudimentary measures for many tasks: building shelters from materials of appropriate size and weight, making clothing fabrics, planting and bartering for food and raw materials. Long before science emerged as a field of study, there were commercial, political and even moral imperatives for unchanging, standard units. Over a thousand years B.C., traders from India and the Mediterranean realised the need to have standard weights. Early Babylonian and Egyptian records and the Bible indicate that the means for weighing standards were seeds and stones. They turned to their environment and used the hard seeds from carob and other plants. The measure for gold and precious gems that we still use, carat, came from the word carob. The mass of the seeds was balanced by a flat stone which the traders carried with them. Babylonians made important improvements upon the invention of the balance. Instead of just comparing the masses of two objects, they compared the mass of each object with a set of polished stones kept just for that purpose. In more modern English measures, the same basis of stones was used for weight. For the horseman, the 'stone' weighed 14 pounds. For wool the 'stone' was 16 pounds, while the butcher and fishmonger used a 'stone' of only 8 pounds.

In Greece the weights were made of lead. Eventually, the Romans took their system of measures with them as they occupied Northern Europe. Pounds and ounces were based on wheat grains that, unlike carob, grew in colder climates.

As societies evolved, measurement units became more complex. More sophisticated numbering systems and the developing science of mathematics made it possible to create measurement systems suited to a variety of trades. It became necessary to find the mass of smaller things and to make more accurate measurements, and the measures had to hold good in different places. However, with the limitations of travel and communications, different systems developed and became established in different parts of the world for the same purposes.

Image
Weigh to Go

In England, the Magna Carta tried to reduce this confusion to a single standard pound. "There shall be one measure of wine throughout Our kingdom, and one of ale, and one measure of corn, to wit, the London quarter, and one breadth of cloth,..., to wit, two ells within the selvages. As with measures so shall it be with weights." (Runnymede, 1215)

But different pounds continued to be used for different goods; one for wool, another for grain, one for precious metals, and still three others for various goods. It went on like this until Queen Elizabeth I decreed, "7,000 grains to a pound for everything except precious metals which would be weighed in Troy pounds of 5,760 wheat grains". (The Troy pound is believed to have originated in Troyes, France.) The larger pound was known as the avoirdupois, or 'averdepois', pound. It was divided into 16 ounces and each ounce into 16 drams so that the needs of a wide range of traders could be met. But despite best efforts, the two pound measures ran side by side.

Fast forward to 1758 when Parliament in London legalised one measure only, the Troy pound. Did the story end there? No, too simple. As the standardised pound was being made (quite literally) by scientists, the King died and all plans were halted for another 66 years. During that time merchants and traders continued using their favourite measure, the 'averdepois'. The scientists had been making three standard weights which were kept, along with a standard yard measure, in the House of Commons in London. To ensure that people throughout the land used the same standard of mass, each town would have a standard, measured against that in Westminster. Local traders and merchants weights were calibrated against it by the Weights and Measures official. Complaints against short measure were taken seriously and markets were policed by the officials. There were quite severe punishments for measurement infractions, ranging from time in the stocks to fines, trading restrictions and prohibitions, to imprisonment.

Image
Weigh to Go
For ten years people used the Troy pound for everything, until once again there was a change in fortunes. In the cellar of the House of Commons, a boiler stoker was burning wooden sticks used to keep track of money lent and borrowed, called tallies. Unfortunately, he burnt down the whole building and the standard Troy weights and other measures were never seen again. It was then decided to use an Imperial Standard measure for the pound, the one that the population preferred and the one decreed 200 years earlier by Elizabeth I, the 7,000 grain avoirdupois. However, that was not the end of the Troy pound, which continued in its original function as a measure for precious metals.

Image
Weigh to Go

If all that history of pounds was not enough, we could always include the apothecaries' pound based on smaller denominations of scruples and drachms which allowed the weighing of light chemicals.
 
Stories of the history of measurement do not have to focus on the British system. For older children studying the ancient civilisations, Europe and British colonisation, there are many connections and enquires that can be made. At about 2500 BC, a Royal Edict in Babylon was issued to standardise weights and measures. This practical business decision was intended to eliminate tension in the marketplace. The smallest unit of mass used was the grain (approximately 45 mg), then the 180 grain shekel and the talent of 3600 shekels (around 67 pounds).


Image
Weigh to Go

By the 18th century, England achieved a greater degree of standardisation than other continental countries. The English units were suited to trade and commerce because they had been developed and refined to meet such needs. Due to colonisation and dominance of world commerce during the 17th, 18th, and 19th centuries, the English system of measurement units spread to many parts of the world including the American colonies. Although the U.S.A adopted the English system of weights and measures in 1836, there have been several differences between the two countries, why?

Image
Weigh to Go
As for the story and politics of the metric system, started in June 1799 with the intention of unification and the declaration, "For all people, for all time", why did Talleyrand try to have Britain jointly adopt it and what part was played by James Watt in its development? Why hasn't Britain still fully adopted the system 30 years after 'decimalisation' ? Is there a need for a single universal system of measurement to avoid costly mistakes, such as occured with the the Mars landing craft? These are all avenues for further research by older students.



Measuring tools, devices and equipment have their own unique history and are a great stimulus for detective work. There are many old scales, brass weights and working standards which were used by inspectors to be found in antique and even junk shops. Making and testing hypotheses about their uses, investigating the materials they are made from and the markings on the instruments leads to fascinating historical and geographical insights. Most weights are parts of sets, the spacing out of the denominations of the weights can be investigated as can be their shape. Did you know that stacking or nested weights, those flat circular kind often seen on market stalls, never exceed 7 pounds? Or that the manufacturer of bell weights, the decorative, tall brass ones with a ring at the top, can be determined by the design of the base and shoulders?

Image
Weigh to Go

Introducing measurement through its stories hooks all sorts of learners of all ages, whether the stories are historical or fictional. Many children's books connect to measurement. Graphing how many barley corns fit along the children's finger joints and what is the average; having each child discover if he or she has a part of a finger that measures an inch - finding their own portable tape measures. All are ways to involve youngsters in what others have been doing for thousands of years. The activities also cross over many curriculum divisions.

We make better sense of new learning if we can put it in a context, a framework that enables us to put this small piece in its place in the bigger picture. Measurement is no exception. Knowing how and why tools, devices and procedures were developed helps create the context for new learning. The history of measurement is long and rich and should not be ignored as a spring board for cross-curricular study.